Packaging manufacturing industries frequently perform compression toughness examinations on corrugated boxes to assess their resistance against exterior forces. These tests are important in establishing the strength of corrugated cardboard boxes as well as their ability to endure compression.
To conduct a compression examination, a BCT (Box Compression Examination) equipment is used. This testing device applies a vertical tons on the upper surface area of a corrugated box to measure its toughness. The examination involves placing the sample between 2 identical plates and applying pressure from both sides. This procedure allows for the measurement of the Box Compression Tester compression strength of packages.
Corrugated boxes, especially single or double-ply cartons, are widely used for packaging objectives. They ensure the secure transportation and also preservation of items from one place to one more. It is important for these packaging boxes to possess sufficient strength, guaranteeing the safety and security of the contained products during transit as well as storage.
If you’re seeking to purchase a high-quality box compression tester, Pacorr Testing Instruments supplies first-class alternatives. They offer a series of packaging testing devices that help in examining the residential or commercial properties of packaging products.
In this blog site, we will certainly go over the appropriate steps to effectively conduct a box compression examination. Allow’s start:
1. Make certain that all sides of the corrugated box are securely shut using suitable tape.
2. Securely connect the screening machine to a 220 Volts AC, 15 Amp switchboard.
3. Location the example in the facility of the compression plates.
4. Trigger the maker and also lower the compression plates toward the sample utilizing the rotating switch.
5. Apply a load of 2kgf to get rid of any kind of gaps between the sample as well as the compression plate.
6. When the lots is used, press RESET & TARE to zero the top lots indicator.
7. Launch the test by adding the maximum weight to the sample for pass/fail evaluation.
Leave a Reply